HVAC Takeoff Software for US Mechanical Contractors
Free preview takeoff
One sheet · About half the rows · CSV export · No credit card · Runs in your browser on Mac or Windows
Try a Free Preview TakeoffSee an AI Takeoff in 10 Seconds
The sample is a real DuctIQ takeoff workbook: no signup. Plans and credits are on the pricing page.
Most US mechanical sets are drawn in feet and inches, with duct sized in inches and an architectural scale such as 1/8" = 1'-0" or 1/4" = 1'-0" in the title block or under each view. DuctIQ reads them as drawn: it measures each run at the sheet's own scale, counts the fittings and air devices, resolves the tags against the schedules, and exports the quantities to Excel.
It runs in the browser on Mac or Windows, so there is nothing to install, and every line is reviewable before it reaches your bid. Plans are billed in Canadian dollars, from $29.99 CAD a month.
Imperial drawings, read as drawn
- Architectural scales such as 1/8" = 1'-0" and 1/4" = 1'-0" are read from the title block or the view label, and each sheet is measured at its own scale.
- Duct labels in inches, such as a 24x12 rectangular supply or a round size marked with a diameter symbol, are read with their system, so supply, return and exhaust stay separate by size.
- A reduced print (a sheet printed smaller than its stated scale) is caught before it is measured, and you can calibrate it from two points a known distance apart.
- Where the specification states a gauge, DuctIQ uses it. Where it does not, it shows the SMACNA low-pressure minimum and labels it as a minimum.
Regional notes from across the US
The drawing conventions are national; the buildings are regional. A few of the markets we hear from:
- Gulf Coast (Houston): cooling and dehumidification drive the design, so commercial, healthcare and industrial sets carry large air handlers, generous supply and return distribution, and significant outside-air and exhaust systems.
- Midwest (Chicago): four seasons mean real heating and real cooling on the same set, and high-rise and institutional buildings pack it into complex, multi-page sets.
- Desert Southwest (Phoenix): cooling is the whole job, with oversized air handlers and heavy supply distribution on commercial and warehouse sets, and repetitive building types where consistency from one set to the next matters.
Pricing and billing
Vent is $29.99 CAD a month (10 credits), Trunk is $55.99 CAD a month (20 credits), Plenum is $99.99 CAD a month (40 credits). Each mechanical plan sheet costs 5 to 15 credits depending on how much ductwork is drawn, and legends, schedules and details are free. The cost is shown before a takeoff runs, plans are billed in Canadian dollars, and you can cancel anytime.
See plans and creditsTry a free preview on one sheetWorking in Canada? See the Canada page
Start with a free preview takeoff
Upload a mechanical PDF and DuctIQ takes off one sheet as a free preview: about half the measured rows, with a CSV export, so you can judge the accuracy on your own drawing. No credit card. Paid plans return the complete takeoff with Excel.
Built by a practicing P.Eng and principal of an Ontario mechanical contracting firm, for the estimators at that firm.
Start your free preview takeoff Download a sample takeoff See pricingNew to AI takeoff and want a hand? Send us your first drawing and we'll help you review the output, or book a 1:1 walkthrough.
Related HVAC takeoff guides
Frequently asked questions
Does DuctIQ work for contractors in the United States?
Yes. DuctIQ reads US mechanical sets drawn in feet and inches, measures the duct at each sheet's scale, counts fittings and air devices, and exports the takeoff to Excel. It runs in the browser on Mac or Windows.
What currency are the plans in?
Canadian dollars. Plans are $29.99, $55.99 and $99.99 CAD a month, and the cost of each takeoff is shown in credits before it runs.
Does it handle SMACNA gauge on US jobs?
When the specification states a gauge, DuctIQ uses it. When it does not, DuctIQ shows the SMACNA low-pressure minimum and labels it as a minimum, so nobody mistakes a default for a spec.
Can I try it on a US drawing before paying?
Yes. Your first takeoff is a free preview (one sheet, about half the rows, CSV) with no credit card, so you can check the result on your own drawing first.